banner
Home » Product > Lid Making Machine
Product Categories

Four-head Automatic Gasket Feeding Machine

Four-head Automatic Gasket Feeding Machine Application: The machine is applied to make the seal rings of 18L / 20L chemical cans, and paint buckets, which can make four seal rings at the same time. It can make 60 gaskets in 1 minute. This machine is used to fill the sealing strips of the...

Send Inquiry

Four-head Automatic Gasket Feeding Machine


Application: 

The machine is applied to make the seal rings of 18L / 20L chemical cans, and paint buckets, which can make four seal rings at the same time. It can make 60 gaskets in 1 minute.

This machine is used to fill the sealing strips of the chemical cans or paint buckets automatically, which breaks original manual operation. It really realizes unmanned operation.

image001.jpg


Parameters:

Four-head Automatic   Gasket Feeding Machine

Weight

2.1T

Voltage

Three-phrase   380V

Size  mm

length*width*   height

4000*2500*2100

Pressure

4-6MPa

Production   Capacity

60sets/ min

Total Power

 7kw

 

Advantages:

1. Advanced Production equipment and production technique.

2. Competitive Price (Factory direct price) with our good service.

3. Different designs are available according to customer requests.

4. Excellent quality testing equipment, 100% inspection on critical .

5. Product quality control and delivery time is strictly controlled;
6.  Direct manufacturing factory offering competitive price;
7. All the inquiries will be replied within 24 hours;
8. Providing first-class after-sales services to the customers.

 

Quality control

1. Checking raw material before producing.

2. Checking one by one before the assembling

3. Checking one by one during the production

4. Have the random inspection before the delivery.

 

Common Faults & Methods

Fault 1: The feeding cylinder can’t go back.

Cause: Its end-point or all parts of it induce the signal unsuccessfully.

Methods: Please check the small cylinder’s induction which can screw down & lift up in the pushing part;

Please check the end-point induction of the pushing cylinder.

Fault 2: The belt of the operating platform can’t work.

Causes: The bottom of the blanking equipment is blocked;

The lower bar induces the signal unsuccessfully;

The blanking clip doesn’t work;

The small cylinders is damaged;

The torsional spring in the blanking clip is damaged.

Methods: Please dredge the blanking equipment;

Please adjust the stop-point magnetic induction under the cylinder, till the light is on;

Change the small cylinder;

Change the torsional spring in the blanking clip;

Adjust the belt of the operating platform.

Fault 3: The belt’s length is different.

Causes: The inductive wheel of the belt doesn’t adjust well;

Proximity switch looses or it is damaged;

The flatness of lids is not up to the standards.

The thickness of the belt is non-uniform.

Methods: Please adjust the inductive wheel to the suitable place;

Please tighten the proximity witch;

Please change the belt.


Hot Tags: four-head automatic gasket feeding machine, China, suppliers, manufacturers, custom, buy, cheap, price

Inquiry