banner
Home » Product > Lid Making Machine
Product Categories
Double-head Automatic Gasket Feeding Machine

Double-head Automatic Gasket Feeding Machine

Double-head Automatic Gasket Feeding Machine Application: The equipment is widely used in gasket assembling of 18L / 20L chemical cans, and paint buckets with two heads, which can work at the same time. This machine is used to fill the sealing strips of the chemical cans or paint buckets...

Send Inquiry

Double-head Automatic Gasket Feeding Machine


Application: 

The equipment is widely used in gasket assembling of 18L / 20L chemical cans, and paint buckets with two heads, which can work at the same time.

This machine is used to fill the sealing strips of the chemical cans or paint buckets automatically, which breaks original manual operation. It really realizes unmanned operation.

image002.jpg


Parameters:

Double-head   Automatic Gasket Feeding Machine

Weight

0.9T

Voltage

Three-phrase   380V

Size  mm

length*width*   height

1850*1850*1900

Pressure

4-6MPa

Production   Capacity

28 sets/ min

Total Power

 2.5kw

 

Original: Yixing, China

Warranty: 1 year

MOQ: 1 set

After-sales Services: We can provide the raw materials for our clients.

                         We can provide the original accessories in factory price.

Quality: The brand of the electric components we use is Schneider.

          All the pneumatic components we use are from AirTAC.


Services:

1. Provide the technical design and solutions;

2. Professional technical training and guidance on site according to the contract;

3. Supply accessories at any time;

4.  Tele-technical consulting and services;

5. Other special technical service according to client’s requirements.

6. Variety types for selection, prompt deliver.

7. Well-equipped with extensive sales network.

8. Advanced Production equipment and production technique.

9. Competitive Price (Factory direct price) with our good service.

10. Excellent quality testing equipment, 100% inspection on critical

 

Faults & Methods:

Fault 1: The unreeling machine keeps spinning for a long time.

Cause: It induces unreeling signal unsuccessfully.

Method:  On the premise of having material, please adjust the proximity switch to the center of the gravity wheel, till the light is on. 

Fault 2: The feeding cylinder doesn’t go forward.

Cause: Its start- point or all parts of it induce the signal unsuccessfully.

Methods: Please check the small cylinder’s induction which can screw down & lift up in the pushing part;

Please check the induction of pushing cylinder;

Please check if the photo-electricity switches of all work-pieces are on;

Please check if the gas path is unobstructed. 

Fault 3: The feeding cylinder can’t go back.

Cause: Its end-point or all parts of it induce the signal unsuccessfully.

Methods: Please check the small cylinder’s induction which can screw down & lift up in the pushing part;

Please check the end-point induction of the pushing cylinder.

Fault 4: The belt of the operating platform can’t work.

Causes: The bottom of the blanking equipment is blocked;

The lower bar induces the signal unsuccessfully;

The blanking clip doesn’t work;

The small cylinders is damaged;

The torsional spring in the blanking clip is damaged.

Methods: Please dredge the blanking equipment;

Please adjust the stop-point magnetic induction under the cylinder, till the light is on;

Change the small cylinder;

Change the torsional spring in the blanking clip;

Adjust the belt of the operating platform.


Hot Tags: double-head automatic gasket feeding machine, China, suppliers, manufacturers, custom, buy, cheap, price

Inquiry